# 6.6.3 - Planned Wellbore

Whenever a planned well is created, a planned wellbore is automatically created below it. It can be viewed by **double left-clicking** on the item one level below the plan, which will always have the suffix ‘planned wellbore’.

The planned wellbore represents the planned well path from surface and is an interpolated listing of the plan. It is constructed using the plan created in the Plan View, using the planning tools, and the survey program in the Plan Properties.

The planned wellbore cannot be edited, and is automatically deleted if the planned well is deleted.

<figure><img src="/files/E0sgnLPd9r5Y66ItPz8l" alt=""><figcaption><p>Figure 55: Planned Wellbore</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.innova-drilling.com/introduction/innova-engineering-manual/well-seeker-x-manual/6.0-well-seeker-x-database-structure/6.6-level-6-planned-well/6.6.3-planned-wellbore.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.