# 6.7.2 - Actual Wellbore

Whenever an actual well is created, an actual wellbore is automatically created below it. It can be viewed by **double left-clicking** on the item one level below the actual well, which will always have the suffix ‘actual wellbore’.

The actual wellbore represents the full well path from surface to TD. It is constructed using the surveys associated with the actual well, as directed by the survey program in the Actual Well Properties.

The actual wellbore cannot be edited, and is automatically deleted if the associated actual well is deleted.

<figure><img src="/files/dUxPoXTnQMwS53O1WzpY" alt=""><figcaption><p>Figure 60: Actual Wellbore</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.innova-drilling.com/introduction/innova-engineering-manual/well-seeker-x-manual/6.0-well-seeker-x-database-structure/6.7-level-6-actual-well/6.7.2-actual-wellbore.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.