# 8.2.12 - WITS
The options in this section allow the user to open the Serial WITS, WITSML or MQTT WITS dialogs without needing to access the Slide Sheet. When accessed in this way the WITS data cannot be used to record the slide sheet or receive surveys, and is purely used to forward EDR data to the server.
The user should click on an actual well or survey in the Object Explorer and then click on one of the WITS options in the ribbon. To change which well is selected, the user should click on the new actual well/survey in the Object explorer and click on the desired WITS option a second time. The selected well can be seen in the status box.
Only one WITS reader can be opened at a time. The user cannot open a WITS reader via the Slide Sheet for the same well, if it already open in a reader via the Home ribbon, or vice versa.
For more information on WITS, see section [**11.11.1.7 - WITS**](https://docs.innova-drilling.com/introduction/innova-engineering-manual/well-seeker-x-manual/8.0-menu-ribbons/8.2-home/pages/0881d36bb788ae6975d4df247b5e142a7558ebc7#id-11.11.1.7-wits)
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.innova-drilling.com/introduction/innova-engineering-manual/well-seeker-x-manual/8.0-menu-ribbons/8.2-home/8.2.12-wits.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.