Well Seeker Pro Release Notes
The most recent release notes for Well Seeker Pro. This document details the various changes implemented between revisions.
Release Notes for 2.2.0.0 (15th March 2022)
- EDM import facility names now handled in a similar way to well names
- When a wits survey is auto accepted the wellbore is automatically rebuilt and survey program updated
- Added support for V14 EDM files
- Added error catch to EDM import when well plan MD exceeds 100,000ft
- Added catch for data fetch where there were a large number of targets
- Lease lines now display on 3d plot at max TVD of ref well not deepest well on plot
- Project head dialog is now modeless
- Added Slide Seen column to the survey grid
- Added BGGM hypercube IFR integration
- Added BGGM Error estimates
- Added superior QC integration
- General performance improvements
- Minor Improvements
Release Notes for 2.1.0.41 (8th December 2022)
- Upgraded data fetch dialog, removed database tree, and replaced with well grid
- Performance increase for data fetch
- Targets in 3d view now display as polygons rather than wire frame
- If all cost report options in the EOWR are unselected, then the well cost and daily cost will not be displayed in other EOWR headers
- Added ability to select multiple filter options on the search page in well analytics
- Improved performance of the database tree delete function
- Added option to clear default primary and secondary logos
- Added new pressure units kg/cm2
- Added additional information to motor report
- Added option to access shipping addresses to main menu
- Removed tool forecasting and geo target calc
- Added helix to tool hours tracking
- Changed the way up down left right is calculated. If the offset well is vertical, up down left right is reference to grid north. Otherwise, high side of the plan is used
- Changed the way targets display when they have a dip and azimuth assigned
- EDM import facility names are now handled in a similar way to well names
- General performance improvements
- Minor Improvements
Release Notes for 2.1.0.0 (29th July 2022)
- Added ellipse expansion as an option for calculating separation factor
- Added MQTT Wits dialog
- Modified EDM import to correctly pick up ellipse scalar expansion error surface
- Added support for jpg / png to operator properties dialog
- Modified error handling in serial wits reader thread so not to exit the thread if there is a data read error with the getoverlapped event
- Added functionality to check logon to server creds with ICPAPI
- Added functionality to sync operator and well access with ICAPI roles
- Removed ICDS remote access permissions
- Removed individual well permissions (can be managed with ICPAPI)
- Forced unit set file to be in app data folder regardless of what is read from the setup file
- Allowed negative TVD to be entered for targets
- Added tortuosity KPI
- Re-worded some of the user permissions error messages
- Removed autoback up database option
- Added Up / Down, Left / right columns to project ahead tools
- Coloured projections green in pdf / excel survey reports
- Removed double prompt to save surveys when printing a survey report
- Will no longer ask if you want to update the survey program if a projection is added to a survey view
- Minor Improvements
Release Notes for 2.0.9.0 (13th June 2022)
- Added tool orders QC Report
- Change to oasis cost code import (using package cost and code now rather than item cost and code)
- Added a cleaning function so that when the slide sheet is opened any slide sheet headers without a corresponding drill string are removed
- When targets are imported the in-use strings for facility well / actual well now come with them
- Added a check to see if the database size > 50mb in the morning report package to stop the file sharing violation error
- Added stator fit to motor kpi export
- Added onJobDate and offJobDate to import from Oasis inventory
- Added ship date / time picker to transfer tools dialog
- Removed assetDescription for Oasis bha export
- Made witsml reader more thread safe
- Added save button to witsml dialog
- RT data exchange warnings now limited to 50 characters
- Personnel names are now filtered by position based on row selection in report personnel dialog
- Added internal costs to cost analysis report
- Added client mode for tcp wits
- Added incident dashboard to the server database
- Added slide and rotate percentage to printed slide sheet (PDF and excel)
- Added motor SN and MWD Type to BHA results KPI grid
- Added Re-Run and direct bill to motor properties in drill string editor, also added these to motor performance report / bha report / motor kpi / bha results kpi
- Slide sheet will keep the ETF cell blank if no value has been entered so the TF prints correctly on the slide report
- Error catches to OA_CC planning methods
- Added max bht and min bht to motor kpi
- Added mwd make to mwd kpi
- Added section days to section kpi
- Added day rate column to personnel data
- Added personnel names and day rate to cost analysis
- Added TVD in / out for motor kpi and section kpi
- Add search box to personnel utilization dialog
- Changed shortcut icon
- Added validation to component make in drill string editor (has to match a value in the drop down list)
- Added collision checking for RT data exchange and wits data threads
- Added new sheet to cost analysis report
- Added option to have mud type as drop down list in daily report
- Cost analysis report is now multi well
- Added a warning when importing well seeker or compass import files to see if the north reference of the field matches the existing field. Same check also done for facility’s.
- Removed web chat
- Added NPT Summary KPI chart
- Added Slide / rotate ROP to ROP per phase KPI
- Added Slide / Rotate to footage per run KPI
- Added cost break down KPI
- Added BHA hours KPI
- Added option to include all charts as a summary section in the EOWR
- Added summary table in EOWR
- Added additional information to the header table in the PDF Well Summary
- Added license request and register options
- RT Data exchange push failure – now displays correct error message
- Added option to request a license on the license expiration dialog
- Added rig name to motor failure excel report
- Minor Improvements
Release Notes for 2.0.8.0 (5th January 2022)
- Sped up the loading of daily reports
- Sped up loading of plan view plots
- Sped up opening of all survey / plan grids
- Removed the need to have hours entered for personnel for days to calculate correctly on personnel utilization report
- Improved revenue report performance in well analytics and made the report look like the report in the daily activity dashboard
- Improved performance of rig days report in well analytics
- Database imports and exports are now backwards compatible, and it doesn’t matter if the database field sizes are different
- Added north reference to field details in survey report headers
- Active magnetics is now set as the magnetics with the most recent date in EDM import
- Added cost analysis report
- Added use ICDS functions to ICP organizations
- Added option to copy WITSML config from one well to another
- Removed six – six reporting option
- Removed use lat long for well head in compass import settings
- Added ability to show revenue for all wells within the time period selected to show up on the printed job board regardless of status
- Added drive type and MWD type to printed job board in activity dashboard
- Added blanks to the MWD type and drive type lists
- Added option to include depth v days chart with excel DDR
- Added debugging / log file for slide sheet / daily activity check / validation tool
- Added option to import a compass EDM file and rename the operator name on import
- Upcoming jobs with no date on them will now show on the activity dashboard
- Added Well Seeker auto updater which can download latest updates from Innova
- Added pop up message for Well Seeker update checker
- Minor Improvements
Release Notes for 2.0.7.0 (21st October 2021)
- Added footage per day by operator and footage per day by rig KPI
- Upgraded all embedded browsers to Edge
- Added option to remove all flat time from depth v time KPI
- Added links to GitBook library and YouTube channel
- Added motor yield report to daily report dialog
- Added max temp and max temp day to the morning report cover
- Resized actual well and planned well properties dialogs for lower screen resolutions
- Added driller days report wo well activity dashboard
- Added a check to make sure the create well on remote option in the data exchange can create duplicates
- Added option to alter the bypass percentage with drill link
- Added option with drill link to detect if the downlink had been aborted by the rig
- Added tabular output to depth v days KPI in well analytics to make plotting in spotfire easier
- Added tool orders feature
- Sped up offset well cleaner
- Added North Dakota certification report
- Re-wrote export targets code so it is much faster and more efficient
- Re-wrote targets import function so it is much faster
- Added search radius circle to well analytics map
- Added option to color depth v time chart in well analytics by operator
- Added option to color well analytics map by operator
- Added reason POOH KPI
- Added offset analysis report to well analytics
- Added MWD Type and Drive Type drop downs to daily reports dialog, added ability to search these parameters in the Well analytics and display them on the Well Dashboard
- Changed the table naming algorithm for the insert new actual or planned well to use the random alpha numeric string rather than number only to speed up the insert on the server
- Changed logic in slide sheet so wits reader thread (from database) now only runs if the WITS / WITSML dialogs are closed. Previously the RT data exchange also had to open
- Added drain hole number to certification report
- Completed work for drill link remote capability
- Added employer column to personnel data dialog
- Personnel names are now sorted alphabetically in personnel data and report personnel drop down lists
- Added search options and filter options to personnel data dialog
- Increased speed of personnel utilization report
- Added colors to personnel utilization report (trainee / day shift / night shift)
- Added employer / operator to personnel utilization report
- Added more error checking in to Well Analytics database search function to prevent date conversion errors if the day month or year is zero
- Refactored load targets code in chart views
- Changed the way in which date searches were handled in Access SQL
- Minor Improvements
Release Notes for 2.0.6.1 (19th August 2021)
- Added time in and time out to motor performance report
- Added inc / azi in and out to motor report
- Added top 10 KPI report to well analytics
- On Well ranking kpi #days is now the number of distinct daily reports not the end date – start date
- Added 3Z activity code for side tracking. Allows an end depth to be entered without hours being included for drilling
- Sped up the global scan in offset selector
- Stopped ellipse interval being set to less than 5
- WITSML pull to file now includes survey 6 axis readings
- Increased the size of the actual well properties dialog.
- Increased size of the insert from inventory dialog
- Removed 2000 well offset limit.
- Allowed ellipse frequency for TC plot to be reduced to 1 only if less than 50 offset wells selected.
- Added field in tool inventory table for previous hours carried forward.
- Tool inventory now calculates total drilling and circulating hours used on a well and displays it in inventory grid.
- Tool inventory now automatically determines which tools are in hole and which tools are clean / dirty.
- Morning report email body now displays tool hours on it in the inventory section.
- Daily report / EOWR cover page now shows tool hours on it.
- Fixed first three columns in the tool inventory grid.
- When tools are transferred, from one inventory to another, hours now accumulate and transfer with them in the tool inventory
- Offset selector now recalculates lat longs while doing the global scan
- In well rankings, report slide percentage is now multiplied by 100
- Added option to fit the bha to a single page in the excel print out
- Drill string editor changes will now be saved even if the user hasn’t clicked out the cell
- Geomag PDF reports now open in adobe.
- When creating a new database, it will now error if the file already exists.
- Performance optimizations for activity dashboard
- Added option to turn off auto rounding of depths for US feet
- Added RoundLabs survey fetch integration.
- Added an error check to loading surveys in the chart view to check if the survey it is tied on to still exists.
- Added option to transfer tools from Oasis to Well Seeker tool inventory
- Added remote database synchronization to data exchange
- Sped up save on SQL server database for activity codes dialog
- Added a filter to the activity dashboard where the upcoming jobs will not display if the start date < current date
- Added serial number and bha num to Oasis cost export
- Added option to print all daily reports to PDF
- Added option to exclude days which do not have a DDR present in the footage per day kpi
- Added option to turn off behind the scenes interpolations in RT AC
- Increased performance searching in Well analytics on server when state name was selected
- Minor Improvements
Release Notes for 2.0.5.001 (31st May 2021)
- Completed Innova software details dialog and Innova email contacts dialog
- Added new tool where a target can be created from the selected line of the plan
- Changed the formation analysis in the Well Analytics to use the depth of the formation as the top rather than the bottom
- Wall plot composer dialog will now maximize correctly on open
- Added new fields to curwits_data to support RT dashboard
- Added the WITSML reader option
- When an EDM is imported it will now trim the names at all levels to remove spaces
- Added whitespace removal tool from names
- Added well horizontal / vertical location uncertainties to anti-collision report headers.
- Added rig messages dialog to DD dashboard
- Added option to have multiple WITS readers and WITSML feeds open in slide sheet
- WITSML Client now shows well status / field / operator when you click on the well level in the tree
- Added WITSML support to pull raw survey data
- Added option to daily reports to sum all BHA’s in 24hr section of daily report
- Added state / county and 24hr footage to morning report email body.
- Added clear messages button to WITSML dialog.
- Added function to detect for duplicate names in the database tree.
- Added copy function well activity dashboard table.
- Added new option to daily report where the performance report shows total drilling and circulating hours or just off bottom circulating hours.
- Target delete message now more descriptive (in use targets listed) can now force a delete even if target is in use
- Added option to filter driller performance KPI by phase
- Rig names and job numbers now sort in data fetch
- Tool inventory report will now save on location filter as global
- Tool inventory report will now only print as per the on / off location filter
- Added sequence number to the cost codes so that the order is preserved when transferred from the bid. Cost codes are now sorted by sequence number first then by code.
- Added SLIDEGRADE to data pushed to CURWITS_DATA.
- Modified import process for Oasis JSON
- For a chart or RT AC if an offset well has only a tie-on line a dummy survey is added at 1ft with the same inc / azi as the tie-on line. Allows calculation of C2C even if no surveys are present.
- Added ability to send AC information from the DD dashboard to server for display on web services.
- Increased speed of drillers performance KPI
- Added option where if a file called “resetLayout.txt” is located in the install directory then the cleanState function will be called which will reset the layout. This is required if a window disappears and cannot be found
- Added option to show well data and survey program for offset wells on anti-collision report
- Changed colour palette for ETF chevron on DD dash board
- Changed CUR_TIME in curwits data to ISO time stamp format for last tf time
- Added Innova ICDS DNS
- Added window headers to tool forecasting (MWD Forecasting and Motor Forecasting)
- Increased the speed of the job search dialog when loading.
- Made logistics dashboard modeless.
- Added refresh button to logistics dashboard.
- Added refresh data to activity dashboard.
- Added search box to tool inventory.
- Added option to change the font size on the PDF report.
- Added option to store IPM file list in the database and pull down to the local from the server
- Added check to interpolate tools to make sure that the interpolate interval is > 0
- Added option to create a target from any line in the interpolate dialog.
- Added option to search database by rig in the database job search
- Added option to exclude database from morning report package in daily reports
- When a new survey is inserted its offsets are copied from the parent actual well
- Added button to main tool bar to connect to the server.
- Component catalogue now shows maximized.
- Speed increases to well analytics search when connected to the server.
- Added log file for blank ipms when uploading to the server.
- Added ipm management options to menu when survey grid is open.
- Significant speed increase to generate KPI’s when connected to the server
- Speed increase for section KPI
- When creating a morning report package the bit pictures are excluded by default
- Made WITS / WITSML mnemonics insensitive to case when updating curwits data
- Added warning to data fetch to let the user know if individual well permissions are enabled
- Added current MTF and GTF values to rigstates dialog
- Added option to transfer reporting data from one actual well to another
- WITSML Can now correctly connect to 1.4.1 servers and has pre-authentication enabled
- Added option to pull in planned points into annotations dialog
- Added Oasis cost code import / export.
- Changed the layout of the WITS reader dialog and also display the ICDS server and port
- Added ICDS Port and IP address as a display item on the WITSML dialog
- Added option to pull job number and rig name from Oasis in report personnel dialog
- Cost tracking report now prints all costs regardless of invoice date ranges saved.
- Minor Improvements
Release Notes for 2.0.4.007 (22nd March 2021)
- Fixed critical bug where the real-time anti-collision dialog separation factor results would be incorrect for a sidetracked well
- License Management feature now open to all corporate license customers using a server database
- Added diff pressure and toolface type to slide sheets to DDR function
- Added new tool which allows recovery of slide sheets from DDR
- Added option to the survey tools editor dialog to turn on / off the inclination only behaviour
- Inclination only behaviour now searchs for “Inclination Only” as well as inc only
- Added opening and closing of motor forecast tool to audit logs
- Multiple licenses can now be present in the install folder and Well Seeker will find the most valid license
- Added check to see if the BHA PU/LD activity code is missing when saving a daily report.
- Added audit tracking for SQL server databases log on and log off.
- MWD run number is now displayed as a separate edit box at the top of the drill string editor dialog. Changing the MWD run number here will also change in the MWD component properties.
- When saving a daily report there is now an error check to look for missing phases (blank cells), incorrect phases (one phase with a different phase above and below it), incorrect / missing BHA numbers.
- There is now a check in the drill string editor for duplicate BHA numbers, this is just a warning which pops up when saving the BHA.
- New option added to survey update email in slide sheet to show build rate to land. This is calculated from the bit projection in the slide sheet and uses the landing point on the plan or the force landing point entered in the actual well properties.
- Warning now shows when saving the drill string if an MWD tool is present and no MWD run number is entered.
- Added MWD shock absorber as an option to add in the tool inventory and the MWD probe order.
- Open Daily Reports / Slide Sheets and Surveys are now saved automatically when the RT Data exchange sends data to the server. Only surveys / reports / slide sheets for the actual well being transmitted will be saved.
- Added option to include motor rental jobs in to motor KPI report. Requirements are: A single daily report with job number rig state and county, a line of daily activity with each bha / motor used in it. Activity code of other and “motor rental job” in the description. The motor data will then be pulled straight from the performance report. The drilling and circ hours will be pulled from the drill bit component in the bha (drilling and circ hours properties) these will not show in the performance report. It is very important to do the daily report first before doing the performance report. If you have auto update motor report selected in the daily report and hit save it will wipe out all the performance report data. If “motor rental job” is found in the activity grid then Well Seeker will not auto update the motor report
- Added option to cost codes dialog at well level to pull updated cost codes from the remote server. Initially there will be a dialog which will show all the approved bids on the server filtered by operator and ordered by entry date. The user then has to select the required bid. This will then be pulled down to the local. Any cost codes which don’t exist in the local will be added, any cost codes which already exist will have the cost updated. Any cost codes which have been deleted will remain in the local unless removed manually.
- Added option to survey email where multiple email address can be pasted in and will be split up if comma delimited (entered in a list with only a comma separating the email addresses)
- Added check for duplicate MWD run numbers
- Can now delete multiple email recipients from the survey email to list
- The MWD run number at the top of the drill string editor will now blank itself out on save if no MWD component is present
- Added warning to drill string editor if drill bit is not the first item
- Added a warning in the daily report editor for duplicate report dates
- Survey email now has a full survey report attached not just simple excel listing of the open survey grid
-
- Minor Improvements
Release Notes for 2.0.4.002 (4th March 2021)
- Added option to Well activity dashboard to toggle between the coordinator being the MWD and the DD
- Added drop down lists for laptop 3 and laptop 4 in performance report dialog
- Added search function to cost codes dialog
-
- In tool forecasting if the updated date column is blank, Well Seeker will auto populate it
- Sped up the load time for the asset work orders
- Allowed negative numbers to be entered for stator fits in drill string editor
- Added option to set daily report hours to 2, 3 and 4 decimal places
- On well analytics search tab the lat long of the selected well will show and can be adjusted and search for based on the lat long rather than just the well name
- Added option to select wells from the database tree to generate the excel KPI reports (motor KPI, section KPI, MWD KPI etc)
- Added check boxes to well analytics search grid to allow selection of specific wells
- On section KPI reports there is now an individual tab for each phase
- Added number of BHA’s column to section KPI in well analytics.
- Added well summary page to section KPI in well analytics.
- Added new splash screen
- Added option to include section separators in PDF EOWR
- Changed the way the pedal curve radius was calculated in anti-collision calculations, now uses a derived unit vector based on the delta NS EW and TVD from the offset – reference
- Added search function to asset build grid
- Added admin function to remove duplicate records from tables
- Minor Improvements
Release Notes for 2.0.3.038 (26th January 2021)
-
-
- BHT copies to new slide sheet line
- Well statistics for inactive and standby phases zero out phase Avg Motor Yield, num slides, Rotary DLS etc
- Sped up the data fetch connect by a factor of 5
- Changed Bit 2 Bend to Bit To Bend in all reports
- Added BHA number / description to daily activity grid print out on daily report (PDF and Excel)
- Added option to show just MD INC AZI and DLS columns on printed slide sheet. Go to slide sheet->settings show short survey (only works if show surveys on slide sheet is selected)
- Added circulating hours and total drilling & circ hours to the well statistics dialog
- Added sim access check to motor and MWD forecasting tool.
- Added copy function to audit logs dialog
- Added separate button to save asset status on asset inventory dialog
- Slide sheet auto save is now 30 minutes instead of 30 seconds
- Autosave slide sheet option now saves with setup file
- On asset inventory added a search button so grid will not be filtered unless button is pressed (reduces lag on server database)
- Added RT AC Report to RT AC Dialog, this allows an email to be opened which reports the AC at a number of projections
- Added warning to check multiple licenses in install folder
- Added warning to check if external files need pushed when push external files is turned off
- Added in zone calculation tool
- Minor Improvements
Release Notes for 2.0.3.034 (15th January 2021)
-
-
- Reduced quality of screen capture to reduce file size
- Removed possible thread collision in DD dashboard
- Added stator vendor and fit the motor properties on the drill string editor
- Removed KPI menu from asset analytics dialog
- Added option for a survey report which annotates the deepest TVD
- Added option to remove flat time from start of well in well analytics depth v days KPI
- Improved load time for asset inventory dialog
- Improved load time for asset inventory overview
- Improved load time for asset analytics dialog
- Improved print time for asset summary report
- Added custom tool tip text to asset analytics chart
- Sped up asset analytics dialog load time
- Added a warning when inserting a component into the drill string from the inventory to alert the user if the component is already in the drill string
- When a new actual well is inserted in to the database, it will now look to see if a principal plan is present and if so, will set the Vertical section and magnetics data to match the principal plan by default.
- Added support for MagVar HRGM model
- Added option to select motor stages from a drop-down menu in drill string editor
- Added asset search function to tools menu. Allows user to search for the asset history of a tool by searching serial number and tool type
- Changed rigs online update time to 5 seconds
- Added option to print all performance reports from Drill string editor dialog
- WITS Dialog reader will now save Send to data server and Send data handshake settings
- If principal plan is not selected as an offset prior to opening DD dashboard then it will automatically be inserted into the offset well selector table
- Added option to filter personnel utilization dialog per position (DD or MWD)
- Added option to assign a BHA to a daily cost and then print the cost report grouped by BHA
- Compass imports now only allow a single principal plan to be created per well.
- Grouped cost report now has the option to group the costs per BHA. Option to toggle on and off
- Added cost per BHA and cost per ft / hr to performance report dialog
- Added support for TCP wits in WITS reader dialog
- Added support for multiple clients to connect to the TCP WITS to allow WITS data from multiple sources
- Added ISO8601 Time stamp field to CURWITS_DATA to support the ICDS transferring WITS data to another database
- DD Dashboard now uses the average rotary toolface and dogleg in its calculations not the last one.
- Changed rigs online dialog update rate back to 30 seconds
- Added option to slide sheet to print all slide sheets into a single document
- Added button to DD dashboard settings to recalculate slide directive
- Added an index to the slide recommendations table
- Added support for ISCWSA Error model rev 5 error terms (XCLA and XCLH)
- Added option to have more than one DD Dashboard open per well
- Added option to show and hide all the individual chart elements on the DD Dashboard
- The dump wits queue in the WITS reader dialog now copies the contents of the list box to a text file and opens it
- Changes to ISCWSA Error model to handle Rev 5 terms
- Added an indicator to the status bar to let the user know the status of the last data exchange
- Added support for ISCWSA inclination only Rev 5.0 terms
- Slide sheet when printed will now display ETF if present rather than TTF
- Modeless dialogs no longer disappear to the back of the screen when a modal dialog is opened on top of them (daily report / Slide sheet etc)
- Added support for BHTavg wits mnemonic in slide sheet and DD dashboard
- Added option to display the full activity code + description in the Activity code column on the daily report
- Added option to turn the surveys on and off in the printed slide sheet
- Added option to print cost tracking report from the invoice date range dialog
- Added slide WOB, #Stalls, Stall Pressure to motor performance report. Added % slide Hrs and Rotate Hrs
- Added option to display phase in comments column on slide sheet
- Added phase column to the daily activity grid in the printed DDR
- Added motor clean / dirty series to logistics dashboard
- Changed BHT to Temp in all reports
- Added pre run dyno as a motor component property option in the drill string editor
- Added stator information and dyno information to motor performance report
- Added computer name to WITS Streams data for Rigs online dashboard
- Added daily cost total to the costs section on the PDF and Excel DDR
- Added minimize button to Wits reader dialog
- Added warning message when WITS reader dialog is closed and wits reader is running
- Now import rig name from EDM file for depth datum
- Now import site and well lateral and vertical errors from EDM file
- On AC report, if depth datums are different the offset MD and TVD are adjusted to reflect the difference in datum elevation. This is only done on the AC report
- When importing from an EDM file the first line of the survey program is always modified to be set to surface. This is to avoid gaps in the survey program due to the way compass handles it.
- When closing Well Seeker from the main window it now prompts to save any unsaved data from any open daily reports or slide sheets
- ISCWSA Error model now handles surface location uncertainty in the Calc_SF function rather than in the calc error model
- ISCWSA Error model now handles the additional depth reference error terms in the IPM file for floating rigs by checking to see if the depth datum used currently is floating or not
- Added option to print tally book size BHA to drill string editor
- Moved IPM folder to app data directory
- When importing ipm files from an EDM a check is made to see if the file name already exists, if it does it checks to see if the files are the same, if they are the file is not imported if they are not a new name is generated and the compass survey programs are updated with the new filename
- Added additional projections (100’ and 200’) to the nudge mode in the DD Dashboard
- Slide recommendation history is now sorted by date time
- If the SF = 0 on the AC report the SF column is now blank
- Added Real time bit hydraulics to DD Dashboard
- Added option to select which BHA’s to print from the Drill String editor dialog
- Added Pre-Run Dyno / Stator Fit / Stator Type / Stator Vendor to the BHA report both Excel and PDF
- Changed the NPT label on the depth v days chart to break out rig / directional NPT
- Added drilling insights dialog
- Removed bend angle drop down list from motor forecast dialog
- Added ability to sort motor forecast dialog
- Tools will stay on the motor forecast for 5 days after the ship date
- Added filters to the motor forecast dialog
- Drill string editor comments box will now resize with the dialog to make it bigger
- Can now add a line to the daily report activity grid without entering a description
- Toolface type now copies on to next new line in the slide sheet
- Added shipping address button to shipping ticket dialog
- Added BR and TR columns to landing grid in multi nudge projection dialog
- Added bend angle to PDF BHA printed from daily report dialog
- Added option to stack projections on top of one another from the project ahead dialog
- Added option to add external files from the motor performance report dialog
- On well phase summary in EOWR if the phase is standby or inactive the footage will be set to zero
- Added Average Rot DLS / TF / MY / Num Slides / Slide length to the Phase data on the well statistics dialog
- For the 2D charts in the main well seeker window, the zoom is now done using the mouse wheel or the pinch gesture, the pan is now done by holding down the left mouse button and dragging and holding down the middle button does the old zoom rectangle.
- Added option to print kpi charts to PDF in well analytics.
- Added MWD Coordinator drop down to daily reports dialog
- Added button to add row to the tool forecasting grid
- Logistics dashboard will now show a blue pin for the row you have selected and always show all jobs
- Asset inventory now no longer deletes the asset inventory table until all sql statements have been built
- Added bit size, WOB, Differential pressure to Well Statistics grid
- Reverted all modeless dialog windows to use the desktop window as the parent window
- Minor improvements
Release Notes for 2.0.3.001 (30 October 2020)
-
-
- Added FOOT as a cost code option to bid sheet
- ISCWSA Model will now take the first magnitude of a duplicate error model term rather than the second
- N terms no longer need to be before the terms they are used in as they are evaluated first
- Duplicate n terms can now be tolerated and will be evaluated based on depth range
- Added option to display revenue summary for calendar month, last 30 days 60 days or 90 days
- Added more descriptive error messages to icds server failures
- Added box to type in motor yield in DD dashboard
- Toolfaces will only be read from the curwits data datable if it is a new value. All toolfaces are now rounded to whole numbers and the serial time is encoded into the decimal places
- WITS Toolface data is now saved to the wits data tables when being read from curwits data on the server
- Added latitude, longitude, BRT, Drilling & Circulating hrs and BHT to section kpi export
- Added access to SQL server transfer functions
- Added IADC dull bit grading code editor to drill string editor
- Added print all BHA’s button to drill string editor
- Added a clear well data option to main menu
- Added option to check for new WITS surveys
- Added Diff Pressure trace to toolface rose
- Added tool face value as annotation in centre of tool face chart
- Added oil water ratio to daily reports
- Slide Sheets now print in landscape on PDF reports
- Added error check to save and add new function into daily report, spots for depth gap, time gap phase and BHA errors
- Added DD dashboard settings
- Added additional bit projection methods and modes to dd dashboard
- Added drop down lists for pulser type, gamma type, helix type, orifice type, directional type, battery type
- Added new drill string properties for DAO, helix type, stickup
- Added drop down lists to the surface system type and the transducer type entries in the MWD performance report
- Added new fields to MWD performance report grid: Laptop 3, laptop 4, BU receiver SN, BU Surface System type, azi error, min temp, max temp
- Added new items above to the MWD performance report
- Added new section / well performance KPI
- Added quarterly phase cost kpi
- Removed vis from motor performance report
- Added option to show offset wells on DD dashboard
- US Feet database conversion errors now write to error file
- Added SN to BHA section on motor performance report
- Added job number to well analytics search grid
- Added state to well analytics search grid
- Well analytics search is now done by start date
- Added ability to open job from well analytics dialog
- Added accounting formatting to the well dashboard report
- Customers and states now sorted alphabetically on activity summary report
- Broke out upcoming status as separate section in activity summary report
- Added verification personnel names to MWD performance report
- Added MWD Failure report to motor report dialog
- WITS Surveys will now also check the depth of the survey rather than just the number of surveys
- Added tooltips to logistics dashboard chart
- Section performance KPI now shows all BHA’s in the table
- KPI data now sorted by well start date
- Added rig state error logging
- Added 3rd Part Motor / 3rd Party MWD / MWD company inputs to report personnel dialog
- Added third party MWD and third part motor count to job summary report
- Added MWD run number to drill string component properties, added to MWD performance report
- Added job number to BHA summary KPI
- Name of linked bid now displayed in cost codes dialog
- New table names now generate with random 8 character alphanumeric string rather than sequential numbering to speed up table name generation
- Added serial number search to logistics dashboard
- Added option to compass import settings to assign lease lines on import (speeds up import)
- Compass import sped up by only assigning lease lines for the imported facility
- Added tool serial number search to well analytics
- Added option to print abbreviated slide sheet in PDF (larger text so easier to read when printed out)
- Added option to select only complete motor runs (runs with an end date) in motor KPI
- Added option to display correction run projection in DD dashboard on 3D plot and Rosebud
- Moved the labels on the projections on the DD dashboard rosebud to a separate table
- Added motor forecasting tool
- Added MWD forecasting tool
- Added warning system to DD dashboard
- Moved all DD dashboard parameters and rig state thresholds from setup file to database
- Added option to include an alternative job number which can be displayed on reports after a certain date
- Added try catch statements for MDB imports along with more descriptive error messages
- Added max RPM warning to DD dashboard
- Added rounding functions to daily activity editor and slide sheet
- Added option to offset lateral target rectangle in the DD dashboard
- Added option to limit AC view on DD dashboard
- Min C2C and Min SF for DD dashboard now controlled through DD dash settings
- Added more informative status bar messages to Access to SQL import
- Added table selection option for Access to SQL transfer
- Added licensing option for DD Dashboard
- ETF will now show the correct toolface type on the DD dashboard
- Added option to save parameter chart ranges in DD dashboard
- Scan radius in offset selector now saves with setup file
- Added rotary dogleg and motor yield to display on DD dashboard
- Changed Motor KPI report date columns to be formatted as an excel date format
- Motor max / min params now gets updated every 30 seconds in the DD dashboard
- Added tool tip text to DD dashboard parameters chart
- Added warnings in for MWD axial and lateral shock to DD dashboard
- Added Max Lateral and Max Axial options in the MWD component
- DD dashboard warnings no longer alarm for min C2C and min SF against the well plan
- Added option to turn on / off display inc only wells as vertical wells
- Audit data can now show a specified amount of records
- Added additional data items for motor forecasting
- Added option to print all slide analysis charts as a single document both PDF and Excel. This is available from the slide sheet file menu, print slide analysis
- Tool faces are now stored in the database with an on / off bottom flag (additional column added to the WITS_GTF and WITS_MTF table called ONBOTTOM) Toolfaces which are on bottom are shown on the slide analysis chart in green, off bottom shown in red
- Warnings in DD dashboard now save to database in the RT_WARNINGS table. This is done every 30 seconds as such the dashboard must be running for at least 30 seconds to capture a warning
- Added report which can be printed from the DD dashboard to show how many warnings have been exceeded and for how long. Go to file->print warnings report
- Added slide recommendation for vertical mode in DD dashboard
- Added initial release of Web chat feature. All messages encrypted and chat history recorded
- Added bit depth and hole depth to rig states dialog for debugging purposes
- Added additional logging for compass imports – compass import settings are recorded in the audit logs
- Added name of the closest well in the warnings for C2C and SF in the DD dashboard
- Webchat server now connects when well seeker opens and monitors for messages in the background. If messages are sent to computer and the web chat is closed, the message window will open
- Added button to daily reports to clear all personnel data. This is used for when a sidetrack is created and you copy all the report data over to the sidetrack well.
- Added some text at the top of the slide sheet to indicate if rig states are running
- Added option to auto save the slide sheet while rig states are running
- Added well name to the title of the drill string editor and the tool inventory
- Added MWD comments section to daily report
- Added TF Sequence to MWD Perf Report
- Added Survey Sequence to MWD Perf Report
- Added XO angle to MWD Perf Report
- Added MWD OOS (Out of Spec) to MWD Perf Report
- Added poppet to MWD Perf Report
- Added auto calculate gamma correction factor
- Added Lateral max delta Inc and delta Azi in to dd dashboard settings
- Added lateral slide recommendation in dd dashboard
- Added values on rig states dialog to see current svy MD svy INC and svy AZI values
- Added delta inc and delta azi to dd dashboard
- Added slide recommendation chevron on rosebud
- Slide recommendation now shows up for nudge and curve modes
- More advanced algorithm for slide calculation in vertical and lateral modes
- Added option to turn slide recommendation on and off
- Added option to filter by company in usage tracking
- Added max and average to usage tracking chart subtitle
- Added option to use the calculated motor yield in the curve mode of the DD dashboard
- Added option to automatically use the calculated rotary dogleg and tool face in the lateral / vertical and nudge modes of the dd dashboard
- Added option to automatically select the target for the curve in the curve mode of the DD dashboard
- Added default motor yield option to the dd dashboard to be used in the lateral / vertical / nudge sections if auto motor yield was turned on
- Added word wrap to tool forecasting grid
- Added option to include tool tracking report with daily report – Excel only
- Changed WITS survey check to look for new survey inclinations rather than new survey MD
- Added warnings to DD dashboard for delta Inc, delta Azi and vertical inclination
- Added plan inc and azimuth to DD dashboard display
- Added option to reconnect to the chat server
- Added a test message function to webchat
- Added option to RT data exchange to sync personnel names and rig data manually
- Added option to launch data exchange from daily reports dialog both toolbar and menu option
- Changed the way in which a rig state change is detected
- Well dashboard now has descriptions on for the cost codes chart in the legend rather than the cost codes themselves
- Added driller performance KPI
- Added verified as a well status option
- Modified the Include Completed motor runs option in the well analytics to only include
- Added note to DD dashboard rose bud when principal plan cannot be found
- Changed nudge mode in DD dashboard to show rectangle rather than circle
- Added gauges to DD Dashboard, gauges can be turned off by option in the settings menu
- Added option to switch centre gauge on DD dashboard between flow / diff P / rop
- Removed 3D dist / CL and VS from survey table at bottom of DD dashboard
- Added context menu options to 3D chart in DD dashboard and regular 3D chart to go to the bottom or top of the well
- Added check to see if a wits survey window is already open for a survey depth. Stops multiple windows popping up if wits survey data is being streamed continuously
- Modified connection logic to stop adding incorrect lines to the slide sheet
- Made curwits_data structure thread safe to stop random crashed happening while running DD dashboard
- Added API number to database search
- Added option to filter inventory for MWD / DD / All component types
- Added option to assign individual wells to individual laptops so that only certain machines can pull certain wells
- Renamed Primary field for MWD tools to Secondary
- Added field status option and shop status option to inventory dialog
- Drill String editor now opens on the last BHA not the first
- Missing job data is now highlighted in red on the daily activity dashboard
- Added current activity to activity dashboard
- Added option to print chat history